Upplýsingar
Nánari upplýsingar
Myndband
Upplýsingar
Kit | 300 W Peak Power | Kit 2 way 4 ohm | AP 1 + AP 6.5 + Crossover
The two-way system features an AP 1 tweeter and AP 6.5 woofer. APCX TW crossover features a two-position level selector providing the ability to adapt its response to its two main applications: +2dB if installed behind the OEM grille, and 0dB for an A-pillar installation without additional grilles between the tweeter and the listener. To ease the installation in OEM placements the woofers are equipped with high current fast-on terminals with double contact on positive and negative poles for high flexibility and quick connection.
Nánari upplýsingar
Features
- AP 1 tweeter with 26 mm diameter diaphragm combined with a wide-roll surround provides maximum efficiency and reduced resonance frequency.
- AP 1 tweeter with an acoustic lens designed to compensate for and fine-tune the in-car frequency response anomalies in the 10kHz – 13kHz bandwidth caused by restrictive OEM grilles in critical OEM placements.
- APCX TW very compact tweeter passive crossover optimized for OEM Integration featuring an attenuation switch (0 dB, +2dB) to tune the in-car response according to different installation conditions.
- Passive crossovers are supplied with fast-on connectors that conform to OEM integration. The ends, different in each of the two poles, eliminate any possible connection errors and speed up the required installation time.
- AP 6.5 woofer with 32 mm pure copper voice coil, for high power handling and outstanding low-frequency control.
- AP 6.5 woofer with a water-repellent treated paper cone, featuring a profile developed with FEM (Finite Element Method) simulation technology and optimized with the Klippel Scan Vibrometer.
- AP 6.5 woofer with reduced mounting depth, providing ease of installation in OEM placements.
- AP 6.5 woofer with TPU (thermoplastic polyurethane) edge, featuring the unique “triple wave” profile for maximum linearity of excursion.
- AP 6.5 woofer with compact basket, protected by abrasion-resistant and scratch-proof coating, the motor affixed with damping epoxy adhesive.
- AP 6.5 woofer with a high current fast-on terminal with double contact on positive and negative poles for high flexibility and quick connection. The terminal features a temperature-resistant plastic cover, protecting it against accidental short circuits.
- Developed with the KLIPPEL suite.
Technical Specs
| Woofer Size | 165 mm |
| Tweeter Size | 26 mm |
| Woofer Voice Coil Diameter | 32 mm |
| Tweeter Voice Coil Diameter | 10 mm |
| Magnet Size Woofer | 85 x 40 x 15 |
| Power Handling – Peak | 300 W |
| Power Handling – Continuous | 100 W |
| Impedance | 4 Ohm |
| Frequency Response | 60 ÷ 20k |
| Crossover Tweeter | HP @ 3,5 kHz – 6 dB Oct |
| Adjustment Tweeter Level | +2; 0 |
| Woofer Cone Diameter | 129 mm |
| Xmax Woofer | 2.5 mm |
Electric-acoustic Specs
| Re Woofer | 3.1 Ohm |
| Fs Woofer | 80 Hz |
| Le Woofer mH @ 1 kHz | 0.23 |
| Vas Woofer | 7.6 l |
| Mms Woofer | 12 g |
| Cms Woofer | 0.31 |
| Bxl Woofer | 4.7 |
| Qts Woofer | 0.7 |
| Qms Woofer | 4.7 |
| Spl Woofer | 93.5 dB |
General
| Weight Woofer | 0.78 kg |
| Weight Tweeter | 0.04 kg |
Myndband
Skyldar vörur
Audison Prima APK 165 (4ohm) 300w
Kit | 300 W Peak Power | Kit 2 way 4 ohm | AP 1 + AP 6.5 + Crossover
The two-way system features an AP 1 tweeter and AP 6.5 woofer. APCX TW crossover features a two-position level selector providing the ability to adapt its response to its two main applications: +2dB if installed behind the OEM grille, and 0dB for an A-pillar installation without additional grilles between the tweeter and the listener. To ease the installation in OEM placements the woofers are equipped with high current fast-on terminals with double contact on positive and negative poles for high flexibility and quick connection.
34.990kr.
Kit | 300 W Peak Power | Kit 2 way 4 ohm | AP 1 + AP 6.5 + Crossover
The two-way system features an AP 1 tweeter and AP 6.5 woofer. APCX TW crossover features a two-position level selector providing the ability to adapt its response to its two main applications: +2dB if installed behind the OEM grille, and 0dB for an A-pillar installation without additional grilles between the tweeter and the listener. To ease the installation in OEM placements the woofers are equipped with high current fast-on terminals with double contact on positive and negative poles for high flexibility and quick connection.
Features
- AP 1 tweeter with 26 mm diameter diaphragm combined with a wide-roll surround provides maximum efficiency and reduced resonance frequency.
- AP 1 tweeter with an acoustic lens designed to compensate for and fine-tune the in-car frequency response anomalies in the 10kHz – 13kHz bandwidth caused by restrictive OEM grilles in critical OEM placements.
- APCX TW very compact tweeter passive crossover optimized for OEM Integration featuring an attenuation switch (0 dB, +2dB) to tune the in-car response according to different installation conditions.
- Passive crossovers are supplied with fast-on connectors that conform to OEM integration. The ends, different in each of the two poles, eliminate any possible connection errors and speed up the
required installation time. - AP 6.5 woofer with 32 mm pure copper voice coil, for high power handling and outstanding low-frequency control.
- AP 6.5 woofer with a water-repellent treated paper cone, featuring a profile developed with FEM (Finite Element Method) simulation technology and optimized with the Klippel Scan Vibrometer.
- AP 6.5 woofer with reduced mounting depth, providing ease of installation in OEM placements.
- AP 6.5 woofer with TPU (thermoplastic polyurethane) edge, featuring the unique “triple wave” profile for maximum linearity of excursion.
- AP 6.5 woofer with compact basket, protected by abrasion-resistant and scratch-proof coating, the motor affixed with damping epoxy adhesive.
- AP 6.5 woofer with a high current fast-on terminal with double contact on positive and negative poles for high flexibility and quick connection. The terminal features a temperature-resistant plastic cover, protecting it against accidental short circuits.
- Developed with the KLIPPEL suite.
Technical Specs
| Woofer Size | 165 mm |
| Tweeter Size | 26 mm |
| Woofer Voice Coil Diameter | 32 mm |
| Tweeter Voice Coil Diameter | 10 mm |
| Magnet Size Woofer | 85 x 40 x 15 |
| Power Handling – Peak | 300 W |
| Power Handling – Continuous | 100 W |
| Impedance | 4 Ohm |
| Frequency Response | 60 ÷ 20k |
| Crossover Tweeter | HP @ 3,5 kHz – 6 dB Oct |
| Adjustment Tweeter Level | +2; 0 |
| Woofer Cone Diameter | 129 mm |
| Xmax Woofer | 2.5 mm |
Electric-acoustic Specs
| Re Woofer | 3.1 Ohm |
| Fs Woofer | 80 Hz |
| Le Woofer mH @ 1 kHz | 0.23 |
| Vas Woofer | 7.6 l |
| Mms Woofer | 12 g |
| Cms Woofer | 0.31 |
| Bxl Woofer | 4.7 |
| Qts Woofer | 0.7 |
| Qms Woofer | 4.7 |
| Spl Woofer | 93.5 dB |
General
| Weight Woofer | 0.78 kg |
| Weight Tweeter | 0.04 kg |
